3 1/2" King by H Jackson (1971) - rolled (some have been folded previously) with all drawings neatly strengthened around the edge with masking tape. These drawings are copies on white paper. Price £35.
2 1/2" Purley Grange by LBSC (L.O.61) - folded, all drawings neatly strengthened around the edge with masking tape. Price £20.
3 1/2" Sweet Violet / 5" Sweet Pea tender from Blackgates (D021) - folded, all drawings neatly strengthened around the edge with masking tape.
7 1/4" Tich by Charles Kennion (1970) - folded, all drawings neatly strengthened around the edge with masking tape. Price £50.
5" Sterling Single from A J Reeves- folded, all drawings neatly strengthened around the edge with masking tape. Price £70
3 1/2" Rob Roy by Martin Evans - folded, all drawings neatly strengthened around the edge with masking tape. Price £40.
5" Polly II 0-4-0 tender loco. Incomplete set. SOLD
5" Polly III 0-6-0 tender loco. Incomplete set. Price £25.
GW1 - loco general arrangement.
GW2 - loco frames.
GW3 - valve gear.
GW4 - cylinders.
GW5 - boiler.
GW6 - 4000 gallon tender.
GW7 - steam brake, brake gear, feed pump, screw reverser etc.
sheet 1 - loco general arrangement, frames etc.
sheet 2 - cylinders and valve gear.
sheet 3 - boiler etc.
sheet 4 - tender.
D6O7 sheet 1 - narrow gauge tender based on a design by Bagnalls of Stafford - SOLD
D608 sheet 2 - narrow gauge tender based on a design by Bagnalls of Stafford - SOLD
sheet 1 - general arrangement.
sheet 2 - frames and wheels.
sheet 3 - cylinders etc.
sheet 4 - valve gear.
sheet 5 - boiler.
sheet 6 - smokebox and regulator.
sheet 7 - whistle, injector, water pump etc.
sheet 8 - backhead, grate etc.
sheet 9 - water tanks etc.
sheet 10 - cab, reversing lever etc.
sheet 11 - brake gear.
RV1 sheet 1 - loco general arrangement.
RV1 sheet 2 - main frames.
RV1 sheet 3 - backhead, springing, reverser, chimney etc.
RV1 sheet 4 - axles, wheel profiles.
RV1 sheet 5 - bogie.
RV1 sheet 6 - sliding bogie.
RV1 sheet 7 - bogie splasher.
RV1 sheet 8 - cylinders.
RV1 sheet 9 - valve gear and lamp.
RV1 sheet 10 - front buffer beam, buffer, check valves etc.
RV1 sheet 11 - brake gear.
RV1 sheet 12 - brake gear.
RV1 sheet 13 - boiler shell.
RV1 sheet 14 - tender general arrangement.
RV1 sheet 15 - tender details.
RV1 sheet 16 - pump body.
RV1 sheet 17 - plug drilling and braking operation.
RV1 sheet 18 - alternative arrangement of reverser gear.
LO27 sheet 1 - loco general arrangement and frames.
LO27 sheet 2 - cylinders, driving and coupled wheels, coupling rods, connecting rods.
LO27 sheet 3 - valve gear arrangement, expansion links, eccentric rods and straps etc.
LO27 sheet 4 - crosshead pump, mechanical lubricator etc.
LO27 sheet 5 - smokebox arrangement, steam and exhaust arrangement, boiler.
LO27 sheet 6 - superheater, regulator, footplate and tanks etc.
'Rob Roy - Building a Caledonian 0-6-0 tank locomotive' by Martin Evans (hardback)
sheet - general arrangement.
sheet 7 - driving wheels, frames, cylinders valvegear etc.
sheet 8 - boiler, expansion links, smokebox, valve gear etc.
sheet 9 - smokebox door, chimney, tender wheels, tender body etc.
sheet 10 - superheater, brake column, cladding etc.
sheet 11 - cab, safety valve, pipe work etc.
sheet 12 - back head, grate, smokebox etc.
sheet - general arrangement.
sheet 7 - frames, coupling rods, wheels, cylinders etc.
sheet 8 - boiler, connecting rods etc.
sheet 9 - superheater, smokebox door, chimney etc.
sheet 10 - smokebox, grate, cladding etc.
sheet 11 - cab, water tanks, etc.
sheet 12 - pole reverser etc.
